Shoring for Concrete Slabs in Toronto

As we all know concrete slabs are the main structural element in a building. We can use concrete slabs for our projects and buildings. But what if your building slabs are not that strong? Is there anything you can do to strengthen them? Yes, and that is shoring! Many people are not aware that you can actually strengthen your slabs with shoring. In this blog post we will shed light on the different types of shoring available, what are the benefits and to help you decide which type of shoring is best for your project. So, if you think you need shoring for concrete slabs in Toronto, read on!

 

What are Slabs

Before we get into listing the benefits of shoring for concrete slabs in Toronto let us review what’ slabs are first. Slabs are generally two to three feet in thickness and can be made from different types of concrete materials like Portland cement, sand and other mixtures. As a rule of thumb, concrete slabs are generally used for most residential buildings. Thus, we need to make sure that we use good quality concrete slabs for our projects.

If you are planning to use the concrete slabs for commercial projects or if you are going to install the concrete slabs in a guest house, then we will suggest that only high-quality concrete slabs should be used. Concrete slab quality doesn’t just matter for residential buildings though. It also matters for commercial projects too, as they also require good material.

What is a Slab Foundation and What Is an Alternative to Slab Foundation?

The Slab Foundation is the most popular and widely used foundation for construction. It is a concrete slab that has been cured at a temperature of about 280 degrees Celsius for about 24 hours. The curing process is done by an electric heater that heats the slab to cure it to a certain degree.

The alternative to the Slab Foundation is the Cement Wall, which consists of concrete walls that are built up using cement paste or cement mortar. Concrete walls are cheaper to construct, but less durable. The slabs can be either entirely flat or have a slight slope. However, the Cement Wall is not as stable as a Slab Foundation and it is therefore better to use this base structure only for excavation, sump pits etc., when nothing more than fill material will be used.

The Benefits of Shoring for Concrete Slabs in Toronto

In order to increase the life expectancy of concrete slabs in Toronto, architects have to consider a variety of sustainable solutions such as shoring for concrete slabs in Toronto with smart concrete. Concrete slabs are made up of aggregate and Portland cement. Addition of a chemical component is required to make them suitable for use in construction.

In shoring for concrete slabs in Toronto, the main advantage is that they can be easily built. But there are also some disadvantages that need to be considered. One of them is that concrete slabs are not very durable. They are made out of concrete, which means they will deteriorate over time. And that is where shoring comes in. The benefits of shoring for concrete slabs in Toronto includes:

• Provides a consistent and reliable slab over time. 
• Shoring for concrete slabs in Toronto is a key component in the concrete slab repair process as it allows the slab to be repaired beyond the available life span of its structural members,
• Extend service lives for several decades. 
• Shoring for concrete slabs in Toronto helps with stability and prolongs the useful life of your building.
• Slabs can support heavy loads and improve the stability of beams, columns, and other structures in the building.
• When they are properly installed, slabs can also resist the abrasion of foot traffic.

Signs that you need Shoring for Concrete Slabs in Toronto

 If you are unsure what to look for in order to determine whether you have slab damage, there are a number of signs that tells you whether or not your slab needs to be shored. Here are some signs to look for.

Slab damage always comes in 4 pieces: a crack, a split, an area of leveling, and the entire slab. A crack is typically seen when you look at the outer side of your slab as well as the inner side. The crack will be visible on one or both sides of your foundation’s wall, usually being located on the inner side of the wall. 

The split will be wider than the width of the walls, usually being approximately 2.5 inches, or 1-1/2 feet. The crack will usually extend 8 to 10 feet along its length. If you notice these signs, it is best to consider shoring. Don’t wait until bad weather sets in, because your slabs won’t stand up in bad weather condition if they have cracks.  Even if you have a solid foundation, it is still important to have an inspection after each big storm. By inspecting your foundation every time, the wind blows, you will be in better shape than if you wait until bad weather comes. If you do take the time to inspect it now and then make sure that your foundations are in good condition!

How to Find the Right Shoring Company

Many shoring companies are available but not all of them are created equal.  Here are some of the tips when looking for the right company doing shoring for concrete slabs in Toronto:

• Make sure to only hire one shoring company that has had professional experience and is willing to share their expertise with you.
• Make sure to check the quality of materials they will use to build the support beams. 
• Check the company’s background.
• If possible, check their reviews and ratings
• Make sure the company has a license to operate
• Make sure they are composed of high skilled contractors and workers.
• They should have a friendly manner

Conclusion

Slabs are a good foundation of a building; however, they are not as durable as we think. Thankfully, there is a solution for that! Shoring is a technique that allows for better stability by preventing slabs from being damaged by the force of the load of the structure. Shoring for concrete slabs in Toronto is used to add additional support to a building in order to prevent damage caused by heavy loads.

Since we live in an area prone to earthquakes, shoring has become an important step in disaster preparedness. A significant benefit of shoring is it reduces the stiffness of the structural members and thus gives the structure a more flexible, or “dynamic” response to shock. In addition to its inherent benefits, shoring can be incorporated into a building’s design by using either precast concrete forms or precast concrete formwork. 

As you can see shoring has many benefits to give. So, if you need shoring for concrete slabs in Toronto, look no further! DELTA GROUP are here to help. We have the experience and know-how to give you the best solution that can be used in your project.  We also have a team of high skilled professionals who can support you through your project.

We want to help you to find the right solution, while ensuring that you will get the best results from it. Our goal is always to give you an end product that will satisfy all your expectations and requirements. We understand that there may be several options for a certain situation, so we offer assistance in this with our team of advisors and resources. When you have questions about your situation or concerns for the future, we are here to help. Contact us today at 905-849-9900.

If you want to know more about our services, you may visit us in 220 Burnhamthorpe Rd E, Oakville, ON L6H 7B6. You may also check our website at https://delta-group.ca/ and get a quote! W serve in the following cities:

Brantford

Burlington

Etobicoke

Georgetown

Hamilton

Milton

Mississauga

Niagara Falls

North York

Oakville

Toronto

Vaughan

Waterloo